Description
TACKWHITE A 22 RP is a waterborne pressure sensitive adhesive, based on acrylic polymers.
The coated product has a very high resistance to plasticizers and humidity. It can be classified as a permanent adhesive.
Application
TACKWHITE A 22 RP is designed for the production of labels in plastic film (especially PPVC).
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 51±1 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 10 - 2501 |
| 8 | pH | 5 - 6.5 | |
| Solvents | water | ||
| Notes | |||
| 1 | No 1 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 1,300 |
| 17 | Rolling Ball Tack | cm | 10 |
| 22 | Static Shear | h | > 100 |
| 97 | Loop Tack Test | g | 1,200 |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | |||
Handling
The product can be applied by Mayer bar or reverse roll.
If necessary, it can be thickened with a suitable acrylic based thickener.
Packaging
The product is supplied in iron drums (200 kg); IBC containers (1000 kg).
Storing
TACKWHITE A 22 RP must be stored at temperature between +5°C and +40°C.
Protect from freeze.
Use within 6 months from production date (unopened and in the original packaging).
| Mod. DT3002E | Creation date: 2/6/2006 | Revision: 4 | Revision date: 9 Feb 2018 |
Above information is reliable, but does not constitute warranty.
