Description
TACKSOL 10/88 is a solvent pressure sensitive adhesive, based on natural rubber and special resins. It has excellent wetting properties on various substrates.
Application
TACKSOL 10/88 can be applied on various substrates (paper, PET, PP, PE, PVC,...).
This product is recommended for the production of protective p.s. films and tapes. It is a soft product, designed for low coating weight applications.
Technical Specifications
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 1 | Total Solids | % | 32±1 |
| 3 | Brookfield Viscosity 25°C | mPa.s | 8000 - 100001 |
| Solvents | heptane | ||
| Notes | |||
| 1 | N. 5 RV; 20 RPM | ||
Film properties
| Method of analysis | MU | Standard | |
|---|---|---|---|
| 11 | Peel Adhesion on Steel | g/in | 1,700 |
| 17 | Rolling Ball Tack | cm | 3 |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | |||
Handling
TACKSOL 10/88 can be diluted with aliphatic and/or aromatic solvents to obtain the desired viscosity. When used for protective film production, it is necessary to cure the product with CURING AGENT D (0.2-1%). In this case, the pot-life of the adhesive is reduced, as crosslinking starts immediately after the addition of the curing agent.
Packaging
The product is supplied in iron drums (145 kg).
Storing
Store at temperatures between +5 and + 40°C in well closed containers. Keep far from heat sources and direct sunlight.
Use within 12 months from production date (unopened and in the original packaging).
| Mod. DT3002E | Creation date: 1/27/2010 | Revision: 6 | Revision date: 10 Mar 2016 |
Above information is reliable, but does not constitute warranty.
